|
|
| Septa |
| » Septa BTO® |
| » Marathon™ Septa |
| » Advanced Green 3™ |
| » Septa 77® |
| » Puresep™ |
| » General Purpose Septa |
| » SGE Septa |
| » Septa Sheets |
| » Septa Accessories |
General Purpose Septa
Ultrasep® R Septa
Ultrasep
R is one of the best low bleed septa on the market. With a 45-55
durometer hardness rating they are not difficult to penetrate.
The upper temperature limit is 350°C. Sold in packs of 10. |
Description |
Part
Number |
3/8"
(9.5mm), 50/pk |
C236905 |
7/16"
(11mm), 50/pk |
C236115 |
1/2"
(12.5mm), 50/pk |
C236125 |
Microsep® Septa F-138-General Purpose; Low Temp Use
| Microsep® Septa F-138 is made of a special silicone rubber forulation with a Teflon® backing. It is pre-treated by washing in distilled water, then baking under vacuum at 200°C. Off-white colour. The septa stabilize rapidly after installation to minimize septum bleed. Sold in packs of 50. |
Description |
Part
Number |
1/4"
(6.0mm), 50/pk |
C220625 |
3/8"
(9.5mm) 50/pk |
C220900 |
0.394"
(10mm), 50/pk |
C220100 |
7/16"
(11mm), 50/pk |
C20110 |
1/2"
(12.5mm), 50/pk |
C220120 |
Microsep® Septa F-174-Medium performance Septum
This
is a good performance silicone septum faced on one side with a
layer of TFE Teflon®. Thickness is approximately 3mm. They
have lower bleed than the F-138 septa. White/Yellow colour. Sold
in packs of 50. |
Description |
Part
Number |
3/8"
(9.5mm), 50/pk |
C230905 |
7/16"
(11mm), 50/pk |
C230115 |
1/2"
(12.5mm), 50/pk |
C230125 |
Economy Blue Septa
| Our blue septa are designed for non-demanding, routine applications. They are easy to penetrate, with a durometer rating of 40-45. These septa can be used up to 200-250°C and are suitable for 90% of all GC analyses. Made from silicone. Sold in packs of 100. |
Description |
Part
Number |
1/4"
(6.4mm), 100/pk |
C234625 |
3/8"
(9.5mm), 100/pk |
C234905 |
7/16"
(11mm), 100/pk |
C234115 |
1/2"
(12.5mm), 100/pk |
C234125 |