Tubing Accessories
Imp® Tubing
This is the standard tubing cutter popular in labs for years. The Imp® Tubing Cutter is ideal for tight spaces; it requiresonly 1 3/4" swing radius tocomplete the job. Fine, nearly burr-free cut can be achieved by slowly increasing cutting pressure. It will cut copper, nickel and other soft tubing, from 1/8" to 5/8" od. It is not recommended for stainless steel tubing.
DESCRIPTION |
PART
NO |
|
Imp
Tubing Cutter |
C436001 |
|
Spare
Cutting Wheels, 2/pk |
C436002 |
|
Imp® Tubing Cutter Junior
For 1/8" to 3/4" od tubing. Use this for aluminium, copper, brass and thin-wall steel.
DESCRIPTION |
PART
NO |
|
Imp
Tubing Cutter |
C227-FA |
|
Cutting Jig
The cutting Jig is ideal for cutting 1/16" od tubing. Included is a knife file and a jig for holding the tubing while it is scored. The Jig stops the file at the correct depth. It is chrome -plated steel for long life.
DESCRIPTION |
PART
NO |
Cutting
Jig |
C436010 |
Spare
File |
C436011 |
Terry Tool Tubi Cutter
This is a uniquely-designed precision tubing cutter that cuts any 1/16" od metal tubing. Its compact design allows use in awkward, hard-to-reach places without removing tubing from the HPLC.
DESCRIPTION |
PART
NO |
|
Terry
Tool Tubing Cutter |
C460008 |
|
Spare
cutting wheel |
C460009 |
|
Outer Reame
These deburr the outer edge of your tubing, for easy insertion into fittings. The reamer tip is made from hardened steel and is mounted in an anodized aluminium handle for a sure grip.
DESCRIPTION |
PART
NO |
|
Outer
Reamer for 1/32" tubing |
C205270 |
|
Outer
Reamer for 1/16" tubing |
C205271 |
|
Outer
Reamer for 1/8" to 1/4" |
C205272 |
|
Heavy Duty Tubing Cutter
This cuts stainless steel, copper, nickel or aluminium tubing from 1/8" to 1 1/8" od. Comes with both standard and heavy duty-cutting wheel.
DESCRIPTION |
PART
NO |
|
Heavy
Duty Tubing Cutter |
C436003 |
|
Cutting
wheels, heavy duty, 2/pk |
C436004 |
|
Tubing Bend
This Tubing Bender can be used for copper, aluminum, brass, steel and other metal tubing. The open side design slips over the tube at any point and the wide hook grips the tubing securely. The tubing bender easily makes smooth short-radius bends up to 180deg. It is calibrated to show the angle of bend.
DESCRIPTION |
PART
NO |
|||
1/8"
Tubing Bender |
C436021 |
|||
1/4"
Tubing Bender |
C436020 |
|||
Inner Reame
Large Reamer |
Small Reamer |
These deburr your tubing for cleaner flow and easier packing. The knurled metal handle fits comfortably in your hand. The tip of the reamer is made from high speed steel, so it can handle all types of tubing including stainless steel. The small reamer is for 1/32" to 1/16" tubing, and large for 1/8" to 3/8" tubing.
DESCRIPTION |
PART
NO |
|
Small
Inner Reamer |
C205261 |
|
Large
Inner Reamer |
C205260 |
|