PEEK Mixing Tees
- For 1/16" or 1/8" OD tubing
- Completely inert and biocompatible
- Mountable
A unique mixing results from the the turbulence created by the introduction angle of the solvents. The mixing is much more thorough than with a conventional tee.
Typically our inverted ferrules are used in these fittings, but the 1/4-28 flat-bottomed details will also accept collapsible ferrule or flanged fittings.
These are available as the body only, or complete with fittings.
A mixing tee with fittings includes:
3 PPS flangeless hex-head nuts 3 ETFE inverted ferrules 3 Color-Sleeve adapters
PEEK Tees
Tubing OD |
Description |
Bore (mm) |
Order Number |
1/16" |
Complete with fittings |
0.75 |
JR-CM1XPK |
Body only |
0.75 |
JR-B-CM1XPK |
|
1/8" |
Complete with fittings |
1.50 |
JR-CM2XPK |
Body only |
1.50 |
JR-B-CM2XPK |
Spare Parts
Description |
Tubing OD |
Quantity |
Order Number |
PPS flangeless nuts |
1/16" |
10 |
JR-55070-10 |
1/8" |
10 |
JR-55071-10 |
|
Inverted ETFE ferrules |
1/16" |
10 |
JR-041-10 |
1/8" |
10 |
JR-051-10 |
Specifications
For 1/16" and 1/8" OD tubing, flangeless connections
Materials:
Body - PEEK
Nuts - PPS
Ferrules - ETFE
1/4-28 threads
Pressure rating (varies with tubing material and ID)
OD |
Bar |
Psi |
1/16" |
105 |
1500 |
1/8" |
35 |
500 |