360 Micron Fittings – Nanovolume™

 

- For direct connection of 360 micron tubing

- Work with metal, fused silica, or PEEK Up to 20,000 psi with metal tubing

- Snap-in rotating ferrule for "one-piece" fitting with no tubing twist

- Eliminate use of troublesome liners

 

These new high pressure fittings permit direct connection of 360 micron OD fused silica, PEEK, stainless, or electroformed nickel tubing without the use of liners. The ferrule snaps into the nut so that the fitting is "one-piece", but the ferrule remains free to rotate as the nut is tightened so that the tube doesn't twist. Because of the compact size and fine 2-56 threads, a leak-free connection that seals at pressures in excess of 20,000 psi can be easily formed with the available manual tool.

Tees and crosses for PEEK or FS tubing offer a choice of three bore sizes, and feature a "quick mount" base with adhesive backing to make sure that the fitting is stable and fragile tubing doesn't get broken. There is also a quick-mount PEEK union.

 

 

--- For PEEK or fused silica tubing - up to 10,000 psi

--- For fused silica tubing - 10,000 psi and above

--- For metal tubing - up to 20,000 psi