Hydrocarbon Traps

This a high-pressure metal cylinder filled with 500 cc of activated charcoal, one of the most effective adsorbents for organics and hydrocarbons. It will remove all hydrocarbons at room temperature except methane, from your FID air and H2 lines, to minimize noise and extraneous peaks in the signal. It is also recommended for use with purge and trap apparatuses, and with GC carrier gases for trace analyses. Highest efficiency is obtained using flow rates below 500 cc/min. Frits in each end prevent fines from entering the gas stream. The Model 300 is delivered filled with high-purity helium; it should be purged before use with the gas you will be using.

Maximum pressure is 1000psig

The Model 300 comes with 1/4" fittings

Approximate dimensions: 2" x 14".

Packaged: 16-1/4" x 3-1/4" x 3" Cardboard Box; Weight: 1,315.4 g

1/4" Model 300 Hydrocarbon Trap

202332

1/8" Model 300 Hydrocarbon Trap

202330

Refill Hydrocarbon Trap(500cc)

202339

• Extra large capacity hydrobarbon filter

• Approximate dimensions 5 x 50 cm including fittings

ZPure XL HC Purifer removes C5 weight and heavier hydrocarbons from gases, air or hydrogen. It is recommended for use with FID gas lines to improve baseline noise and sensitivity.

Packaged: 21-1/2" x 3" x 3-1/2" Cardboard Box; Weight: 1859.7 g

ZPure™ XL HC Purifier - 1/4" Brass Fittings

202233XL-B

ZPure™ XL HC Purifier, 1/4" Stainless Steel Fittings

202233XL-SS

ZPure™ XL HC Purifier, 1/8" Brass Fittings

202232XL-B

ZPure™ XL HC Purifier, 1/8" Stainless Steel Fittings

202232XL-SS

ZPure HC, 1/8” Brass Fittings

202232-B

ZPure HC, 1/8” Stainless Steel Fittings

202232-SS

ZPure XL HC, 1/8” Brass Fittings

202232XL-B

ZPure XL HC, 1/8” Stainless Steel Fittings

202232XL-SS

ZPure HC, 1/4” Brass Fittings

202233-B

ZPure HC, 1/4” Stainless Steel Fittings

202233-SS

ZPure™ XL HC Purifier - 1/4" Brass Fittings

202233XL-B

ZPure™ XL HC Purifier, 1/4" Stainless Steel Fittings

202233XL-SS